Feiyutech AK4500 di Desain dengan bagian leverage rasio emas, eksklusif untuk pengambilan gambar yang tahan lama. Desain bagian leverage rasio emas yang dapat dilepas memungkinkan gimbal terlahir kembali dari kemudahan penggunaan dan kepraktisan, membuat gimbal semakin hebat! Peralihan bebas bentuk ganda tidak hanya meningkatkan kemungkinan gimbal dalam permainan, tetapi juga membuat penembakan sesuai keinginan Anda.
Feiyutech AK4500 Pro dilengkapi dengan tambahan item Feiyu Follow Focus II for AK Series Gimbal dan Feiyu Hyperlink Remote Control for AK2000/4000/4500 Gimbal.
Muatan 4.6kg, dengan hard core
Berhasil menjadi gimbal DSLR teringan, AK4500 memiliki berat hanya 1,6kg dengan paduan aluminium ultra-ringan yang sangat ringan. Motor brushless generasi baru dengan medan magnet yang kuat dan torsi tinggi yang super bertenaga. Muatan maksimum adalah 4.6kg yang dianggap sebagai muatan terbesar di sektor gimbal kelas 3kg. AK4500 dapat dengan mudah mendukung semua DSLR populer di pasaran, kinerja tinggi di luar imajinasi Anda.
Secara otomatis menyesuaikan daya tanpa penyesuaian
Mengadopsi chip berkinerja tinggi baru dengan algoritma anti-guncangan yang cerdas, mesin ini dapat secara otomatis menyesuaikan daya dengan motor super tanpa elektroda otomatis eksklusif Feiyu. Pengguna dapat menghabiskan lebih sedikit waktu dalam mengatur daya motor secara manual sehingga menghemat energi dan tenaga.
Beralih antara potret dan lanskap, jelajahi Tiktok sepenuhnya
AK4500 dapat dengan mudah mengganti mode pemotretan antara potret dan lanskap hanya dengan satu klik. Tidak hanya untuk VLOG tetapi juga untuk membuat video pendek.
Semua operasi di satu layar
Gimbal pertama yang menggunakan layar sentuh LCD di seluruh industri, membuatnya mudah dioperasikan tanpa aplikasi ponsel, mengendalikan mesin Anda, di mana saja, kapan saja.
(Mengatur hampir semua parameter gimbal dan parameter kamera langsung melalui layar sentuh LCD)
Gimbal flexibletouch lebih nyaman untuk dioperasikan, menampilkan mode status saat ini, dan dengan mudah beralih atau memilih mode fungsi dengan satu tombol untuk mengambil gambar pemandangan yang indah.
Hubungkan kamera Anda ke gimbal dan pengoperasiannya akan lebih nyaman. Anda dapat mengganti layar dengan menggesernya ke kiri dan kanan, dan dengan mudah menyesuaikan pengaturan parameter kamera seperti ISO, white balance, dan sebagainya.
Mengontrol mesin setiap saat adalah hal terpenting bagi fotografer. AK4500 dilengkapi dengan layar sentuh LCD yang memungkinkan Anda untuk mengatur hampir semua parameter gimbal secara langsung, serta parameter kamera, tanpa APP telepon.
Instalasi cepat tanpa leveling
Desain papan pemasangan cepat dua lapis dimulai di seluruh industri. Desain standar Manfrotto dan desain Benro memberi Anda pengalaman nyaman yang luar biasa. Gunakan kamera dan lensa yang sama tanpa perlu leveling lagi. Sistem pemasangan cepat yang unik dirancang dengan struktur sekunder, kompatibel dengan Manfrotto dan standar ARCA Swiss Type, yang memungkinkan fotografer mengganti peralatan dengan cepat. Setelah kamera diratakan, kamera dapat dengan cepat dilepas dan dipasang tanpa meratakan lagi, meningkatkan efisiensi pengambilan gambar dan mendapatkan pengalaman yang luar biasa!
Ciptakan pengalaman detail terbaik: motor dilengkapi dengan desain tombol pengunci dan dapat digunakan untuk memperbaiki tiga sumbu saat meratakan dan menyimpan, untuk mencegah guncangan. Pegangannya bisa dilepas, menghemat ruang penyimpanan dan membuat membawa lebih nyaman.
Kamera yang dikendalikan kawat, stabil dan andal
Cocok untuk berbagai kamera mainstream, yang mendukung banyak peralatan periferal. Buat fotografer menerobos keterbatasan peralatan dan menjadi lebih kreatif.
Desain miring memungkinkan jangkauan penangkapan gerak yang lebih luas saat mengambil gambar. Kenop induksi magnetik presisi tinggi tidak hanya mengontrol fokus dan zoom tetapi juga dapat digunakan untuk mengontrol rotasi presisi tinggi motor, memberi Anda pengalaman yang luar biasa. Antarmuka ekstensi USB multi-fungsi membuat ekspansi tidak terbatas.
AK4500 dapat mengikuti fokus secara akurat dengan tombol multifungsi dan ikuti fokus nirkabel eksternal. Ini disesuaikan dengan Canon, Sony, Panasonic, Nikon dan lain-lain. Fokus ikuti waktu nyata dapat secara akurat menyesuaikan gambar dan memenuhi kebutuhan pengguna.
Mendukung mode Inception dalam empat cara, mendukung kecepatan dan respons yang ditentukan pengguna dengan cepat. Menciptakan dampak visual dan efek sinematik yang kuat.
Salah satu kunci untuk menyalakan mode pemburu bayangan. Meningkatkan kecepatan gerak motor dalam waktu singkat memungkinkan gimbal mencapai efek transisi yang cepat dan menangkap momen yang bergerak cepat. Video yang menarik dapat dibuat tanpa operasi dan pasca produksi yang rumit.
Berbagai jenis pemotretan selang waktu: selang waktu statis, selang waktu gerak, selang waktu lintasan ... Luangkan waktu sebagai pigmen, rekam cahaya dan bayangan, AK4500 akan menunjukkan keindahan waktu.
Dengan struktur yang dapat dilepas, pegangan remote control nirkabel, pegangan serbaguna, dan batang ekstensi dapat digunakan untuk menyelesaikan penerapan berbagai pemandangan. Ini tidak hanya dapat digunakan secara terpisah, tetapi juga digabungkan untuk memenuhi beragam kebutuhan fotografer. Pegangan gagang ganda, Pegangan serbaguna, Ikuti fokus, Remote control, dan aksesori lainnya membuat pengambilan gambar profesional bekerja lebih nyaman. Menambahkan beberapa antarmuka periferal: antarmuka aksesori perluasan tambahan, 3 antarmuka ekspansi USB multi-fungsi, port audio, dll., Untuk meningkatkan lebih banyak kemungkinan perluasan. Ini juga dapat digunakan bersama dengan perlengkapan telepon seluler baru untuk menghubungkan telepon.
Cameras Supported | Payload:150g/0.33lb--4600g/10.14lb(lens and other accessories are included, and center of gravity of gimbal is balanced ). Part of cameras & lenses tested: 1 Canon 5D Mark III/ Mark IV/ 6D / 80D and other cameras with similar dimensions and weight Lenses: Canon EF 24-105mm f/4L IS USM, Canon EF 24-70mm f/2.8L USM, Canon EF 16-35mm f/2.8L II USM, Canon EF 17-40mm f/4L USM, Canon EF 35mm f/1.4L II USM, Canon EF 100mm f/2.8L IS USM Macro Lens + lens hood, Canon EF 85mm f/1.2 L II USM + lens hood, Canon EF 50mm f/1.2L USM (focus ring is stuck on lens support frame, only works in AF) Canon 1D X Mark II Lenses: Canon EF 35mm f/2 IS USM + lens hood, Canon EF 85mm f/1.2 L II USM+ lens hood, Canon EF 135mm f/2L USM+ lens hood, Canon EF 100mm f/2.8L IS USM Macro Lens + lens hood 2 Sony α7/ α9 series Lenses: Sony FE 16-35mm f/4, Sony FE 24-105mm f/4 G OSS, Sony FE 12-24mm f/4 G, Sony E 50mm f/1.8 Mid-Range Lens, Sony E PZ 18-105mm f/4 OSS, Sony FE85mm f /1.8, Sony FE 35mm f/1.4 3 Panasonic, Nikon and other cameras, like GH5/GH5S, Nikon D850/Z6/Z7, Fuji XT3,etc. 4 Cinema Camcorder like Canon C100/C300 with lens EF-S 10-18mm f/4.5-5.6 IS STM Sony FS5 Bmpcc 4K with cage accessory |
Battery | 18650 rechargeable battery*4, 2200mAh, 3.7V (please pay attention to installation of batteries) Battery charging via USB port on gimbal is not supported. Please use the charger provided for charging batteries. |
Usage Time In Theory | 12 Hours (When camera is balanced with gimbal) |
Charging Time | ≥5 hours by the charger provided and the adapter 5V/3A (quick charger is banned). When the indicator on charger give a solid red light, that means batteries are charging. With a solid blue light, batteries are fully charged. |
Materials In Main Body | Aluminum Alloys |
Weight | 1656g (not included the battery, shutter release cable, camera, lens and so forth) |
Water-Proof Grade | Not Water-proof |
Dimensions | 429*240*175.3mm(Not included Detachable support frame) |
Rotatable Range | Tilt: 230°(with limitation) Roll: 360° (Unlimited) Pan: 360° (Unlimited) |
Controllable Range | Tilt: +175° to -55° Roll: 360° (when parallel to the ground, and works in Dutch-Angle shoot mode, it could be automatically rotated 360°in one circle or several circles) Pan: 360° (unlimited) |
Quick release plate | There are two kinds of quick release plate together in one. Bottom mounting plate is compatible with Manfrotto PL501, Upper quick release plate is compatible with ARCA quick release system, which can be removed from the gimbal together with the camera, and fast switch between two popular quick release systems without re-assembling and re-balancing the camera. |
Installation of Camera and Balance | Unlock the motor:Please remember to unlock the motor before mounting the camera and turning it on. Tighten the camera: Tighten the camera with 1/4 inch screw on upper quick release plate, slightly insert upper quick plate on bottom mounting plate, the auto-lock will automatically move back to fix the upper quick release plate, mount it on bottom mounting plate, and fix the mounting plate with safety lock. Fix hot shoe at upper side of the camera with fixing frame of tilt axis to get two-way fixation. (make hot shoe less tight to make a convenience of moving camera slightly back and forth and tighten it until tilt axis is balanced). Extension support applies to those with relatively higher heights, like Canon 5D/ 1DX series. Note: ① Please place the motor on the right side when putting the lens forward ② Please mount the lens support frame when the lens is longer than mounting plate. Balance: Step by step to adjust vertical and horizontal direction of tilt axis, roll axis and pan axis. The standard of balance: camera can stay there no matter where you point it to without holding by hand (tilt axis should be perfectly balanced). |
Battery Installation and Power | Unscrew tailcap and insert batteries based on the following picture. |
On & Off | Power on & off: long press the function button, the display will show “FY” and release it when you hear the beep tone. |
Working mode | Pan follow:The roll and tilt direction are fixed, and the camera moves according to the left-right movements of user's hand. Follow mode:The roll direction is fixed, and camera moves according to the left-right movements, up-down movements of user's hand. Lock mode:The orientation of the camera is fixed. All Follow Mode:All three axis of gimbal follows the movements of user's hand. |
Touch Screen | Main interface:Show some working state, change working mode and operation Main display shows different camera modes, status of functions, including WiFi, Bluetooth, Battery, Working Modes, Zoom & Follow Focus & the axis controlled by Multifunction Knob. Note: Icon in grey means the option is not available. Swipe to left Once & Twice:adjust the parameters of camera when Wifi connection between gimbal and camera is done, including ISO, Exposure Compensation, Scenes, ect,. |
Button operations | ★ Mode Button Single tap: switch between Pan Mode /Lock Mode. ★ Joystick 1 Control gimbal and turn left/right/up/down 2 Adjust parameters of Rotation Time & Scroll Setting ★ Camera Button 1 When WIFI of camera is connected with gimbal, single tap camera button to take photo 2 When shutter release cable is attached to both camera and gimbal, single tap camera button to have camera take photo. Please refer controllable camera listing to take photo. ★ Video Button 1 When WIFI of camera is connected with gimbal, single tap camera button to control the recording. 2 When shutter release cable is attached to both camera and gimbal, single tap camera button to control the recording. Please refer controllable camera listing to control the recording. ★ Power Button Long Press: power on & off ★ Trigger Button Long Press and hold: Enter Follow Mode, back to previous mode after loose it. You can set up this operation to Lock mode, follow mode, sport mode with APP Double Tap: Reset gimbal, three axis return to initial level, and gimbal works in Pan Mode. ★ Function Button Single tap function button on the main interface to lock/unlock Touch screen. When other interfaces are activated, single tap function button to go back to the main interface. ★ Multi-function Knob Long Press: switch between gimbal control and camera control Single Tap: 1) when gimbal control is activated, single tap to switch among Pan Control / Roll Control / Tilt Control 2) when camera control is activated, and WiFi of camera is connected, single tap to switch between Zoom and Follow Focus options (They are available to those cameras which provide support). Besides, when a external follow focus unit is connected, its rotation could be controlled. |
How to control the camera | USB cable control:Control picture-taking with camera button, control the recording with video button, it works with Sony ,Canon, Nikon, Panasonic camera in controllable listing. WIFI control:: Gimbal can connect with camera via Feiyu On app and WiFi. When connection is done, camera could be controlled to take photo/video/zoom/follow focus. Note: 1 WiFi feature should be included so that camera could be connected via WiFi. 2 Digital Zoom and Follow Focus could be performed when they are supported. Please refer to the list of controllable cameras. Because Sony does not open source of protocol, thus Follow focus is supported by Sony cameras. If needed, please attach a external follow focus to Sony Camera. |
Motor Power Adjustment | Auto-match of Motor power is available to the App or Touch Screen. Gimbal also performs the auto-match process after being turned on, according to the load detected. |
Available Functions for Users | One tap to change working mode, directly show the state of camera connection, Bluetooth ,battery at the display. One tap to enter Dutch Angle shoot, long exposure timelapse, Vlog Selfie and vertical shooting for TikTok, more special shooting way to be continued . Manually set up the rotation speed, picture interval, long exposure time and the movement route in auto-rotation mode for long exposure timelapse. Control and set up the camera, follow focus ,zoom in&out with USB cable control or WIFI control. Customize the trigger button, motor power, shooting mode, control object ,language,etc. Initialize the gimbal when it is not level. Manually set up the shooting angle on tilt axis by hand. Upgrade the firmware , Set up the parameter, virtual remote control on APP. |
Extended Ports | There are nine extended ports in single handle AK4500(basic version) One 1/4 thread hole on the top of sliding arm of tilt axis for installation of extension support or other accessories. One 1/4 thread hole behind tilt motor. USB port and 3.5mm round hole Under mounting plate to connect and control camera Each USB Port at the back and in front of mounting plate to connect external AFK II. 1/4 thread hole at the left and right side of pan motor to extension support other accessories, such as monitor, Mic and so forth. 1/4 thread hole at the bottom of the handle to mount Tripod or other accessories. |
Accessories for basic version | Sony USB cable:USB2.0 to Micro(A01)*1,Canon USB Cable:USB 2.0 to Mini(B01)*1, 5D Mark IVUSB Cable: USB 3.0 to Micro 3.0(A02)*1,Shutter release for Panasonic (L1)*1, Nikon&EOS R USB Cable: USB 2.0 to TypeC(C01)*1, Bottom mounting pate*1,Upper quick release plate *1,support frame for tilt axis and round holder and long screw*1 set, 18650 battery*4, Underslung arm and tighten screw*1 set , anti-slip tripod*1, support frame for lens and fixed screw*1, Thumb screw to fix the camera*1, Micro USB charging cable*1, battery charger*1, EPP box. Note:Nikon&EOS R USB Cable: USB 2.0 to TypeC(C01)*1 is not in the package yet. |
Accessories for standard version | Brushless AFKII*1, Underslung arm and tighten screw*1 set,Hyperlink remote control*1set,Sony USB cable:USB2.0 to Micro(A01)*1,Canon USB Cable: USB 2.0 to Mini(B01)*1, 5D Mark IVUSB Cable: USB 3.0 to Micro 3.0(A02)*1,Shutter release for Panasonic (L1)*1, Nikon&EOS R USB Cable: USB 2.0 to TypeC(C01)*1, Bottom mounting pate*1,Upper quick release plate *1,support frame for tilt axis and round holder and long screw*1 set,, 18650 battery*4, Carbon Fiber extension bar*1, anti-slip tripod*1, support frame for lens and fixed screw*1, Thumb screw to fix the camera*1, Micro USB charging cable*1, battery charger*1, EPP box. Note:Nikon&EOS R USB Cable: USB 2.0 to TypeC(C01)*1 is not in the package yet. |
Optional Accessory | Tripod with 1/4" screw (pay attention to its max payload), Extension Accessories and Body-mounted Weight Support for installing flash lamp/ soft light/ Microphone and other devices via cold shoes. |